WIPERAPP Wiki

⌘K
  1. Home
  2. WIPERAPP Wiki
  3. Basics
  4. Offline Mode

Offline Mode

1. What you need

Step 1: A USB flash drive with the latest WIPERAPP ISO written to it.
Step 2: A phone or tablet with a camera that can scan QR codes.
Step 3: Internet access on the phone/tablet (for wiping authorization).

Important – before you start
To ensure that the OFFLINE wiping process and later certificate import work correctly:

  • The WIPERAPP USB drive must stay connected to the computer for the entire wiping process.
  • You can unplug it only after the message confirming that the wiping process has finished appears on the screen.

 

2. Starting WIPERAPP in Offline Mode

Step 1: Boot the computer from the USB drive with WIPERAPP.
How to boot, clik Start WIPERAPP ISO
Step 2: From the list of available boot options (there are four), select the OFFLINE version.
Step 3: After WIPERAPP loads, the GUI window will appear and, after a second, the Settings tab will open automatically.

 

3. Configuring settings

Step 1: In the Settings tab, fill in all required information (e.g. customer details, referense number, responsible person – according to your process).
The “Wipe Organization” field will be filled in automatically when importing certificates after the wiping process from the panel.
Don’t forget to fill in this field on your administration panel!
Step 2: Confirm the configuration by clicking “Save”.

Settings tab in WIPERAPP offline mode with the customer and reference fields filled in

Step 3: After saving, you will see the full active GUI view:
• SMART parameters of the drive,
• drive contents in the HexViewer,
• access to the Settings and About tabs.

WIPERAPP offline interface showing drive SMART parameters and the HexViewer

 

4. Starting the Offline wiping proces

Step 1: In the device list, select the drive you want to wipe.
Step 2: Click the green arrow next to the navigation buttons for the selected drive to start the wiping process.

Green arrow next to the selected drive that starts the wiping process

Step 3: A window with a QR code to scan will appear.

Window with the QR code to scan for wiping authorization

 

5. Authorizing wiping via QR code

Step 1: Use your phone or tablet to scan the QR code shown on the screen.
Step 2: Open the link provided by the QR code.
Step 3: Log in to your account and:
• verify the drive’s serial number,
• confirm that you want to wipe the selected drive.

Drive serial number confirmed on a phone before the code is generated

After confirmation, a verification code will be generated on your phone/tablet.

Verification code generated on the phone after the wipe is confirmed

Step 4: Enter this code into the WIPERAPP application on the computer.

Field for entering the verification code in WIPERAPP

Step 5: Once the code is correctly entered, the wiping procedure will start.

Wiping progress of the selected drive

 

6. Finishing the wiping proces

Step 1: Wait until the wiping process is completed.
Step 2: When it finishes, a message confirming the end of the wiping process will appear.

Message confirming that the wiping process has finished

Only then you can:
• disconnect the WIPERAPP USB drive,
• move on to wiping the next computers,
• proceed to import the encrypted certificate files into your admin panel.

 

7. Importing Offline wiping certificates

Step 1: On a computer with Internet access, go to panel.wiperapp.com.
Step 2: Log in using the same account that you used on your phone/tablet for the uthorization.
Step 3: Go to the Reports tab and click “Import reports”.

Reports tab in the WIPERAPP panel with the Import reports button

Step 4: Connect the WIPERAPP USB drive to the computer.
The encrypted files ready for import are stored on the USB drive in: (WIPERAPP)wiperappoffline.
Step 5: Import the report files using one of the following methods:
• drag and drop the files into the designated area,
• click “Browse”, navigate to the folder with the files, select all files to import and click “Open”.

Report import window with the drag and drop area and the Browse button

Step 6: During the import, you may see two types of file status:

  • Green highlight – the file has been imported successfully.
  • Red highlight – an import error occurred, for example:
  • the file is not a valid report file,
  • the certificate has already been imported before (duplicate).

Imported report files marked green for success and red for an error

 

8. Accessing certificates

After the import is completed wiping certificates are immediately available in the panel, you can download them and
attach them to orders or share with your customer according to your internal procedures.

List of wiping certificates available in the panel after import

How can we help?